Product description:
1.Filtering precision:0.1μm.
2.Oil contained in compressed is below 3ppM.
3.Filtration efficiency:99.99%.
4.Service life is approximately 3500h-6000h.
5. Initial pressure differential≤0.02Mpa.
6.Filter element of air oil separator is made by the thin fiberglass,which
imported from HV&Lydall company.
Quality system :
1. Our factory has perfect inner quality inpsection system for each procedure,
and QC operators check each production procedure .We make sure that the
parts are qualified flowing into the next producdure .
2.Finished products test in lab as OEM standard and national standard .
3. Passed ISO9001-2000 certification.
Ingersoll Rand Modes:
Model |
Flow rate m3/min/0.7mpa |
Orginal P/N |
D mm |
H mm |
Ademan model |
Ml-22 | 3 |
39831888 54955442 |
194 | 226 |
8262681694 8166082600 |
M-22 | 3 | 39751391 | 194 | 216 | 8261681694 |
30S | 3 | 42855486 | 194 | 216 | 8261681694 |
UPS22 | 3 | 54749247 | 135 | 305 | 8360581635 |
M-37 | 6 | 92754688 | 194 | 232 | 8263281694 |
ML37 | 6 | 39831888 | 194 | 232 | 8263281694 |
50S | 6 | 39831888 | 194 | 232 | 8263281694 |
EP100 | 10 |
42841239 39863857 36876472 |
336 335 |
356 356 |
8365683636 8365683635 |
M55 | 10 |
46501073 39737473 92871326 |
299 |
190 |
8169082699 92754696 |
P600SCU |
5601513 42862077 |
300 301 |
190 190 |
8169083600 8169083601 |
|
75S | 10 |
39894597 92722750 |
302 | 190 | 8169083602 |
EP200 | 20 | 42841247 | 375 | 457 | 8465783675 |
M90 | 20 | 54509427 | 374 | 455 | 8465583674 |
900 |
89285761 54509435 |
360 535 |
500 450 |
8560083660 8465085635 |
|
150S | 20 |
39863865 39863840 |
375 240 |
455 275 |
8465583675 8267582640 |
ML-250 | 40 |
39831920 39760590 |
431 432 |
412 412 |
8461284631 8461284632 |
M-250 P600 |
40 |
39890600 54509500 |
430 430 |
444 412 |
8464484630 8461284630 |
VEP400SCU VHE750 |
11 6 |
22219174 92699198 |
431 305 |
460 250 |
8466084631 8265083605 |
VHP700E P1050E EPE450 |
20 29 60 |
39863899 39863881 92062132 |
535 534 440 |
465 464 862 |
8466585635 8466485634 866284640 |
Determination of test criteria:
(1) the ISO 2942 Hydraulic fluid power - Filter elements - structural integrity of the
(2) ISO 16889 hydraulic transmission - filter - Determination of filtration characteristics
of the multiple pass method
(3) ISO 3968 Hydraulic Transmission - Filters - Determination of flow characteristics
(4) ISO 3724 Hydraulic Transmission - Filter elements - Determination of flow fatigue
characteristics
(5) ISO 3723 Hydraulic Transmission - filter - axial load test methods
(6) ISO 2943 Hydraulic Transmission - Filter elements - material compatibility with
fluids of verification
(7) ISO 2941 Hydraulic Transmission - filter - burst resistance verification
Just choose us! We will satisfy your needs!